Oz Charge 12V 30Amp Solar Charger with LOAD control - Surface Mount 450 Watts Max
This solar charge controller is designed to regulate the voltage into a battery to minimise recharge time, prevent overcharge, and maximise the service life.
It is pre-programmed for all lead-acid type batteries (AGM, GEL, WET) however for best results we recommend the use with AGM types.
The LOAD terminals allow monitoring and control of up to 30Amps.
Intelligent microprocessor control.
Natural cooling (no fan)
Over-discharge protection Low Voltage Disconnect (LVD).
High efficiency Pulse Width Modulation (PWM) charging circuit
Large LCD for easy reading
Maximum solar input: 500Watts
Maximum solar voltage: 28Voc
Maximum output: 30Amps
Maximum load: 30Amps
Charge voltage: 14.5V
Float/Trickle voltage: 13.7V
Low Voltage Disconnect (LVD): 10.2V trip. 12.0V reconnect.
No load power consumption: <25mA
Operating temperature: -25 to +40 degC
Dimensions: 164mm(W) x 92mm(H) x 43mm(D)
* Product Specifications subject to change without notice.