Model No: ZVS-380
(Remote Alarm, Immobiliser and Keyless Entry)
MAIN FEATURES
(2) 2-Button Remote Controls
Red LED Light
Dual Zone Shock Sensor
On-Board Relays for Door Lock / Unlock
On-Board Relays for Parking Lights.
Starter Interrupt
Flashing Parking Lights
Standard Siren
1 Auxiliary Output
12 Month Warranty
DETAILED FEATURES
Door, Boot, Bonnet Protection - When the alarm is armed, if any of these entry points are opened, the alarm will trigger for 30 seconds and the LED will flash rapidly. If these entry points are tripped more than 3 times, the alarm will automatically bypass these zones.
(Zones are re-activated once alarm is disarmed then re-armed)
Remote Panic - When activated, the siren will sound and indicators (or parking lights) will flash continuously.
To activate the Panic feature, press and hold Button 1 for two seconds.
To deactivate remote panic, press Button 2.
Dual Stage Shock Sensor - This sensor is designed to detect both light and heavy impacts to the vehicle's body. This sensor is fully adjustable by your authorised installer.
At the time of installation, the shock sensor will be adjusted to the appropriate setting. Once the alarm system is activated, the shock sensor continually monitors for impact to the body of the vehicle.
LED - The dash mounted LED will flash at a rate of once per second when the alarm is ON.
Valet / Service Mode - Valet / Service mode prevents the alarm from arming if the automatic arming feature is selected.
Valet / Service Mode disables the alarm system.
*Omni Lock - The vehicles doors can be locked and unlocked by using the remote transmitter whilst the ignition is on. (*Note: Vehicle must be equipped with central locking)
Temporary Silent Arm / Disarm - Press Buttons 1 and 2 simultaneously to arm the alarm silently. Press Button 2 to disarm the alarm silently.
Last Stage Arming Memory - If Alarm is armed and the vehicle's battery is disconnected, when the battery is re-connected the alarm system will remain armed.
Remote Control Code Learning - The Alarm system can hold up to four Remote Controls. At any time a lost or stolen remote transmitter can be deleted from memory by your authorised installer.
* Locking Outputs - If your vehicle is equipped with central locking, the alarm system can be connected so the doors will lock when the alarm is armed and unlock when disarmed.
** Remote Boot Release - Press and hold Button 2 for two seconds, the siren will chirp once and the boot will open.
(Vehicle must contain electronic boot release for this feature to work)
** Starter Disable / Immobiliser - Once the Alarm is activated, the vehicle will be immobilised. The starter motor circuit will be interrupted. Once the Alarm is deactivated, the immobiliser will be deactivated.
SELECTABLE FEATURES
The features listed below may be configured at the time of installation.
These features can only be programmed by your authorised installer.
Ignition Safety Door Lock / Unlock - If all doors are closed when the ignition key is turned to the ON position, after 5 seconds, all the doors will lock. (Note: Central Locking is required for this feature)
When the key is turned OFF, all the doors will unlock.
Factory setting is OFF.
Safety Re-arm - If the alarm system is accidentally disarmed whilst walking away from your vehicle and providing no entry points (doors / boot / bonnet) are opened within 30 seconds, the alarm will automatically re-arm and the doors will lock (Note: The doors will only lock if the vehicle is equipped with central locking)
* If vehicle is equipped with power door locks and they are connected to the alarm system by your installer.
** May require additional connections, components, and/or charges. See your installer for details.
|
Downloads
Owners Manual (PDF 121KB)
What's in the Box?
Main Control Unit
Dual Stage Impact Sensor
Standard Siren
Wiring Harness
LED Status Warning Light
2 x Remotes
1 x Override Switch
|
|
|